1. The tanker in the tanker equipment ① inspection of shift and shift operations; inspection method: listen, whether the operation sound of the tanker is normal; look, whether there is leakage or deformation at the connection of the tanker shell and the parts of the whole machine, and the display Is it normal; smell, with or without peculiar smell. ②Daily maintenance. When changing shifts and refueling idle time, the oiler wipes the housing of the oil dispenser to keep it clean and free of dust and dirt; often open the door of the oil dispenser to wipe off the dirt inside the machine; oil the pump bearings, counter bearings and transmission parts; belts Whether it is loose, whether the wiring is loose.
2. The oil tank of the fuel dispenser equipment: it should be a steel oil tank, and there should be a support frame welded in the tank; the capacity is generally 15-50m3; the buried tank should be anti-corrosion.
3. Process piping and accessories of the fuel dispenser equipment ① Oil suction pipe: equipped with a bottom valve, 15cm from the bottom of the tank. ② Oil discharge pipe: 0.2m from the bottom of the tank, the port has an inclined port; the oil discharge end is connected with the tank car hose by a sealed quick joint. ③ Oil measuring hole: It is used for metering and should be opened on the center line of the manhole; ④ Breathing pipe: Install flame arrester at the pipe mouth, the diameter of the pipe is not less than 50cm, the height from the ground is not less than 4m, the distance from the wall is not less than 3m, and the distance from the building is not less than 3m. Doors and windows shall not be less than 1m.
4. Manholes for tanker equipment: The entrances and exits of maintenance, tank cleaning, calibration and other operations cannot be embedded and connected by bolts.
5. The fire vent of the tanker equipment: installed on the top of the tank breathing pipe, exhaust when unloading oil, and inhale when refueling.
